How to Mount Security Camera to Stucco?

Michael started his professional career as a security-camera technician. Later, he started his own business of security-camera service, and it's been a decade that he’s...Read more

Using surveillance cameras has numerous benefits. But you have to install it properly to use it to its full potential. When it comes to installing it on a Stucco wall, things might get confusing as the surface is generally different compared to concrete and wood.

So, if you’re wondering how to mount security camera to stucco, we’re about to put an end to the dilemma.

For you to mount a security camera on stucco, you need the camera kit, a drilling tool, and the anchor to fasten on the stucco wall. It all comes down to you getting the right tools and choosing the right location to mount the security camera.

The stucco wall is quite strong, so it will demand the use of some advanced tools for you to drill past the wall for effective installation. Once you have the tools in your hand, let’s get to work and help you install a camera on a stucco wall.

How to Mount Security Camera to Stucco?

Stucco is a plaster finish commonly used for the outside walls of homes. The added advantage of stucco is that it’s rough exterior provides a ready platform for mounting cameras.

How to Mount Security Camera to Stucco - in-depth guide

So, wall mounting a security camera is not difficult, especially on stucco, as it is sturdy and strong.

You can easily install a security system on your home with some very basic tools. Follow these simple instructions on how to mount a home security camera to stucco so you can easily protect valuables in your home.

Tools and Materials You Will Need to Mount Security Camera to Stucco

There are not too many special tools required to mount a security camera to stucco, but few are necessary. First, you need a drill with a masonry bit installed in it. Then, for the actual mounting of the bracket, you will need screws suitable for stucco walls. Getting the ones with a moisture sealing rubber gasket is the best option.

Mount Security Camera to Stucco

Additionally, you might want to use some sealant or plaster after the installation is done. Here are some of the tools that you need below.

  • Ladder –  You will need a sturdy ladder. We recommend a ladder that can reach 2 feet higher than the point on the wall where you want to mount your camera.
  • Drilling machine – A drilling machine will come in handy when you need to drill a hole or two on your stucco wall.
  • Anchor for stucco –  Stucco surfaces can be difficult to mount security cameras that require an anchor, but you don’t need to call a professional. You need to get a quality anchor for it. There are many you will get in the market.
  • Security camera – You need the main device. There are many hidden cameras for bedroom, sitting room, and outdoors that you can consider.

Mount Security Camera On Stucco With Drilling Holes

If you want to mount your security camera on stucco using drilling holes, then you need to follow the instruction or steps below:

Mount Security Camera On Stucco

Get a Quality Camera

Good security cameras are durable and with humidity-resistant properties to protect against moisture. It can be installed on the walls, ceilings, or wherever they are needed most. You can purchase any security camera from any surveillance company.

Ensure that you choose the best based on recommendation. There are many you will find in the market, and not all of them are good to deliver the best result.

Select the Right Location to Mount the Camera

Before installing your security cam, you will want to find the perfect spot. We suggest mounting it where most of your traffic comes in and out of your home, so you can see people’s faces as they enter.

Many people like putting surveillance equipment near their front door or garage. Make sure it’s not too high up, though, because you want to be able to identify faces.

Install Mounting Anchor

Installing a mounting bracket to stucco is less difficult than it might seem. The easiest way to mount a security camera on stucco is using self-drilling stucco anchors. These plastic or metal fasteners are designed with brick, brick veneer, and concrete blocks. At most hardware stores, you can find stucco fasteners, also known as masonry anchors or concrete anchors.

Initiate Drilling and Screwing

If you want to mount a security camera on stucco, you must drill the holes with a carbide-tipped masonry bit. This is because carbide-tipped drilling bits are mostly used for masonry and concrete drilling.

Initiate Drilling and Screwing

Masonry bits aren’t appropriate for use with ordinary steel or wood screws. However, if you use a hammer drill and impact driver to make holes in your stucco wall for mounting security cameras, you can get the job done.

You just need to drill holes and screw in the anchor to the wall to ensure it is solid for you to mount the camera on it without any hassles.

Install the Camera and Cables

The camera will be installed using screws. Using the right screws is important because they may not hold on to stucco if the screws are not right. You need to carefully mount the camera on the anchor and run the cables.

Mount Security Camera On Stucco Without Drilling Holes

If you want to mount your security camera on stucco without drilling holes, you need to get adhesive tape to keep the camera to the wall. It is not the safest method, but it thus works.

Mount Security Camera On Stucco Without Drilling Holes

You need to ensure you get quality adhesive tape that can withstand nature, such as wind and other external factors that can displace the camera. Also, using a hook is another method to install your security camera on the wall without drilling.

Safety Tips While Mounting Security Cameras to Stucco

You need to keep some safety measures in place when installing a security camera to stucco.

Safety Tips While Mounting Security Cameras to Stucco

Install the Camera on the Anchor (Not the Drywall)

Before you mount the camera to stucco, make sure to mount it to an anchor and not just drywall. If you are concerned about drilling into the concrete, you can opt for a drywall mount.

It is also a good idea to live in an area with frequent tremors. However, if you want your camera to be securely placed on the wall, then mount it on self-tapping screws or through-bolts instead of with nails or screws.

Use the Right Drill Bit.

To avoid damaging your stucco home when you install your new security cameras, be sure to use the right drill bit sizes and types. The most important aspect of drilling into stucco is to use the right drill bit.

Drill Bit

Installers frequently use a standard masonry bit to drill holes in stucco. Masonry bits have helical threads and deeper flutes, making them susceptible to clogging when drilling through stucco, but they are still the best.

Use the Right Fastener.

The right fastener will depend on the type of stucco used. For example, hard-coat stucco requires a masonry drill bit and screws rated for concrete or brick. On the other hand, a powder-actuated fastener can drill into concrete or other solid material.

For a softer stucco, you will need to drill small holes first and then use wood screws specifically designed for drywall to mount your camera housing.

Avoid Cracking of The Wall.

If you want to mount your security cameras on stucco or concrete, it is best to drill a small hole and use anchors that would expand as you screw the screws. But, again, it helps to avoid cracking of the wall.

Cracking of The Wall

Cracking of the wall is a common issue with stucco surfaces. It is recommended to use a long screw that can reach the stud. It will distribute weight evenly to avoid cracking of the wall. It is also recommended to use drywall or masonry anchors for better security and stability.

Keep the Cables All Secured

The one thing that you want to keep in mind is that you’re going to want to make sure that all of your cables, especially your power and even some of your camera cables, are secured up neatly. You do not want any water to get in here.

Therefore, you should use cable clips and zip ties to secure the cables. In addition to securing the camera in place, cable clips and zip ties are a great way to ensure the cable lines are not visible.

Conclusion

Most homeowners who have stucco walls face the challenge of installing security cameras on the walls. However, it is not a difficult task to do with the guides as we’ve discussed how to mount security camera to stucco.

All you need to do is, get the right tools, trace and poke the holes, and mount the camera. One thing to keep in mind though, be careful about studs and drywall, stay aware of existing cracks, and don’t make new ones.

Michael started his professional career as a security-camera technician. Later, he started his own business of security-camera service, and it's been a decade that he’s been doing it. There is simply nothing that he doesn’t know about security cameras and their accessories. He created this site Aimprivacy, to share his knowledge and decade of experience with people who don’t have any prior knowledge about security and spy cameras.

More Posts

Leave a Comment